OPF-RMR is shipped with plate to slide screws (M3-0.5mm x 6mm, same as what Glock®MOS plates uses), and sight to plate screws (6/32 x 3/8), a T10 key and a VC3 packet. OPF-G, RMR's thickness is unchanged from that of the Glock®MOS plate, it doesn't change the sight's mounted height, nor does it require different iron sights. OPF-G, RMR accomplishes all of the goals outlined above. Adapter plate is to be machined in steel.Step 4: When the GLOCK MOS Adapter Plate is completely mounted on your GLOCK MOS pistol, install the optic system. Step 3: Tighten the 2 Torx screws to fix the GLOCK MOS Adapter Plate on your GLOCK MOS pistol. Correct length sight to plate, and plate to slide screws. Step 2: Select the appropriate GLOCK MOS Adapter Plate and place it in the correct position.Eliminate the need to use an additional sealer plate. OVERVIEW Trijicon RMR Footprint Mounting Kit - Fits Glock MOS, Springfield OSP & Prodigy, Walther PDP, and H&K VP9 Optics Ready SKU: AC32064 RETAIL: 20.Sight is to be fully supported in the front and rear by recoil lugs/fences, with minimum movement.OPF-G, RMR's shape follows its functions, same as all of our products. We used Glock's MOS adapter plates as a basis, and designed our version of what we think it should and can be. OPF-G, RMR is a collaboration with a USMC combat veteran and former USMC Shooting Team head coach, Tom Shields. Glock's MOS may not sit as low as some, but in our opinion, what MOS offers more than makes up for it, namely a uniform sight height, ease of installation, parts commonality and availability. Step 3: Tighten the 2 Torx® screws to fix the GLOCK MOS Adapter Plate on your GLOCK MOS pistol. The time it takes to send in the slides to be milled, and varying quality of the milling work and optics ready slides notwithstanding, there was a lack a standard regarding the sight height, it'd be a coincidence if two slides milled by two different shops share the same sight height. Step 2: Select the appropriate GLOCK MOS Adapter Plate and place it in the correct position. Heretofore, users have had to send in their slides to be milled to accept mini red dot sights, or opt for 3rd party optics ready slides. Standards, commonality, availability of parts are all good things. We like the Glock®MOS concept, even if we find the factory MOS adapter plates could use some help. Next, bolt the RMR sight with the battery. Wipe off excess oil from the parts and slide as you go. After removing the cover on the slide of the pistol, bolt the 02 labeled plate from the Glock MOS plate package with two of the screws provided. Glock's OEM MOS plate's width matches that of the slide, but OPF-G, RMR is already wider to fully support the RMR, thus it is compatible with all MOS equipped Glock®slides. There are two screws holding the RMR to that plate provided with the Trijicon MOS sealing plate kit. OPF-G, RMR (Optics Platform, Glock, for RMR) is a Glock®MOS Adapter Set 01 and Set 02 compatible plate for mounting Trijicon RMR or SRO on Glock®Gen 4 and Gen 5 slides, G17, G19, G34, G35, G41 (width 25mm/1 inch.) and G40 that uses Set 02.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |